Cheese block cutting machine
Cheese block cutting machine
I propose to consider a commercial offer for our new Dutch equipment, cutting cheese into bars of different weights and sizes. Productivity is 1000 kg/h. If a take classic cars for these purposes, they are quite expensive, so there is our simple solution, the weight may not be accurate when cutting. The packaging can put the scales in the stream.
Our cheese block cutting machine can process all sizes of cheese blocks up to 25kg.
You can specify the dimensions of the cutting grid additionally.
The maximum size of the incoming block is 400*320*400 mm
For portions of 5 or 1 kg, we recommend that you lower the cutting screen and leave vertical slicer.
The cutting mesh for 5kg blocks will have holes of about 175*175mm.
The block will be extruded through the cutting grid and cut across.
The cutting mesh for 1kg of blocks will have holes about 80*80mm in size.
The block will be extruded through the cutting grid and cut across.
The performance of this system depends on the temperature of the cheese. Cheese core temperature must be above 4 degrees Celsius. Productivity 40 blocks of 25 kilograms per hour. If you want a cross cutting knife, then it is also +5.000.00 EUR.
For the American market, depending on the machine model, we supply 220V-60Hz-1ph or 220V-60Hz-3ph electrical power.
In different countries, our equipment may have different names: Cheese block cutting machine, cheese cutting machine, cutting cheese machine into bars.
Transport: Buyer is responsible for shipping to any non-sanctioned country worldwide.
Packaging: Standard cardboard box packaging is already included in the price of your order.
Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic components.
Electronic component checks are performed by technical staff at our company's office in Italy. Expenses related to technical inspections, functionality checks, transportation, and packaging of spare parts for repair or replacement, as well as labor costs for installing spare parts, are the responsibility of the buyer.
Repair or replacement of machine parts with non-original spare parts voids any manufacturer warranties. This also applies to technical actions not provided for in the machine's "Operation and Maintenance Manual" or those performed without the manufacturer's permission. Machine parts subject to natural wear and tear or improper maintenance during machine operation are not covered by warranty. In all of the aforementioned situations, the buyer cannot demand compensation from the manufacturer.
The buyer must ensure that upon delivery to the destination, the equipment fully complies with contractual requirements and that no damage occurred during transport. Otherwise, the client should not use the machine and must notify us within 7 days. The manufacturer's liability is limited to reimbursement or replacement of only those parts that, in the manufacturer's opinion, are defective or non-functional. If damaged or defective machine parts are discovered, the complete replacement of the machine is excluded, and the manufacturer is not responsible for any collateral damage or customer loss due to a faulty machine. Defective parts are replaced with new ones only after receipt at the manufacturer's facility.
The following situations are not covered by the warranty:
Accidental damage during transportation.
Damage caused by improper machine use or negligence and inadequate technical maintenance.
Malfunctions resulting from incorrect machine installation.
Interventions performed by unauthorized third parties or other malicious interference.
The company is not responsible for problems, damage, or incidents arising from the absence or improper application of instructions described in the "Operation and Maintenance Manual" for the machine. Any machine use or intervention that does not conform to the aforementioned manual should be considered incorrect and inappropriate.
VAT: Not included.
Installation and Setup: Test start-up and final run-in of the machine at the seller's site using the product before shipment. Not included. The cost of machine installation and setup performed by technical personnel is 500.00 EUR per day, plus transportation and accommodation expenses.
EU Compliance: All machines come with a printed "Operation and Maintenance Manual" containing a certificate of compliance with EU standards and the corresponding label.
Liability: The manufacturer is not liable for improper machine use.
Claims: Any potential claims will be considered only if submitted in writing within 7 days of receiving the product. The legal entity responsible for resolving potential claims is the court in Netherlands.
Product Delivery: Product delivery is not permitted without prior written agreement and the corresponding accompanying documents.
Manufacturer: Netherlands
Factory price EXW: from 43.000,00 EUR