Complete line of caramelized crispbreads 1400 pcs/h
Complete line of caramelized crispbreads 1400 pcs/h
This line offers the possibility of producing a new product, resembling movie theater popcorn in taste, but with the appearance of gluten-free and yeast-free crisps covered in caramel. To diversify taste options, there is also a consideration for covering these products with chocolate in the future, presenting a different offering. Packaging is done in flowpacks, with options for packaging: 3 pieces or 4 pieces per package.
The product is a budget-friendly model of airy snacks with a diameter of 90 mm. For the production of these crisps, 2 presses are required with the following specifications:
Fixed product size: diameter 90 mm x thickness 7-10 mm
Production rate: up to 1400 crisps per hour
Control type: hydraulic microcontroller
Electrical heater power: 4 kW
Power supply: 1 phase, 220 V, 50 Hz
Dimensions: (WxHxL): mm
Weight: 140 kg
Price for 2 pieces EXW Italy: starting from 20.000,00 EUR.After the crisps are produced, caramel syrup can be sprayed onto them. For this purpose, a machine for caramel coating is used, allowing for an even distribution of caramel syrup onto the surface of the crisps. This equipment enables regulation of pressure, caramel quantity, and angle of inclination. The machine includes a caramel sprayer and a heated base.
Machine specifications:
Net weight: 12 kg
Power source: electricity
Power: 0.95 kW
Power supply voltage: 220 V
Tank volume: 1 liter
Control panel: electronic
Dimensions: 340x180x390 mm
Installation type: tabletop
Body color: gray
Price without compressor EXW: 2,270.00 EUR.
If cooling of the syrup before packaging is necessary, a cooling tunnel is recommended. For this purpose, a used SOLLICH cooling tunnel with a belt width of 280 mm is available for 13,000 EUR. Alternatively, a new tunnel with a belt width of 320 mm is available for starting from 22,750.00 EUR. An additional cost of +2,100.00 EUR is applicable for the glass version.
Specifications include:
Power supply: 1 phase; 230 V / 50-60 Hz; 2.5 kW
Dimensions: Length 6000 mm x Width 680 mm x Height 1300 mm
Additional cost for every 2 meters extension: +4.200,00 EUR
At the end of the line, manual feeding onto a flowpack packaging machine is required. Price FOB China: starting from $7,500.00.
In different countries, this equipment may have different names:grain processor for crispbreads with interchangeable molds, crispbreads machine with interchangeable molds, rice cakes machine with interchangeable molds, corn cakes machine with interchangeable molds, rice cakes machine, corn cakes machine
Transport: at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.
Packing: standard packing wooden pallet + carton box included in the product price. At the request of the buyer for a separate payment, packing in a wooden box is possible.
Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.
The check of electronic components is carried out by technical staff at our company office in Italy. The costs associated with technical inspection, functional testing, transportation and packaging of spare parts for their repair or replacement, as well as labor costs for the installation of spare parts, as mentioned above, are at the expense of the Buyer.
Repair or replacement of machine parts with non-original spare parts, voids any warranty obligations from the Manufacturer, this also applies in case of technical actions not presented in the “Operation and Maintenance Manual” machines or which are performed without the permission of the manufacturer. Parts of the machine that are subject to normal wear or improper maintenance during the operation of the machine are not covered by the warranty. In all of the above situations, the Buyer cannot claim damages from the Manufacturer.
The buyer is obliged to check that, upon delivery to the destination, the equipment technically fully complies with the contractual requirements and that no damage was found during transport. Otherwise, the client must not use the machine and notify us within 7 days. The responsibility of the Manufacturer is limited to the reimbursement or replacement of only those parts that, in the opinion of the Manufacturer, are damaged (faulty) or non-functional. In case of detection of damaged (faulty) parts of the machine, a complete replacement of the machine is excluded and the Manufacturer is not responsible for collateral damage or loss of customers of the Buyer due to a damaged (faulty) machine. Damaged (faulty) parts are replaced with new ones only after they are received at the factory.
The following situations are not covered by the warranty:
Accidental damage during transportation;
Damage caused by improper use of the machine or as a result of its negligence and insufficient maintenance;
Malfunctions caused by improper installation of the machine;
Interventions performed by unauthorized third parties or other malicious interference;
The company is not responsible for problems, damages, incidents that may arise as a result of the absence or poor application of the instructions described in the “Operation and Maintenance Manual for the machine”. Any use or intervention on a machine that does not comply with the manual mentioned above should be considered wrong and inappropriate.
VAT: not included
Commissioning: not included. The cost of installation and commissioning of the machine, carried out by the technical staff, is $500,00 per day, plus transport and accommodation costs.
EU Compliance: all machines are accompanied by a printed "Operation and Maintenance Manual", which contains the EC Declaration of Conformity, as well as the corresponding nameplate.
Responsibility: The manufacturer does not bear any responsibility for the misuse of the machine.
Claims: Possible claims will only be taken into account if they are submitted in writing within 7 days from receipt of the Goods. The legal entity responsible for resolving possible claims is the Court of Italy.
Delivery of goods: delivery of goods without written approval and relevant accompanying documents is not allowed.
Manufacturers: Italy, Germany, China.
Price ex-works (EXW): from 43,000.00 EUR.