top of page
Semi-automatic onion peeling line

Semi-automatic onion peeling line

€66,700.00Price

Our Korean company offers a semi-automatic line for pneumatic cleaning of both small and large-sized onions with a production capacity of 500 kg/h. Onions are initially loaded into a receiving hopper with a feeding conveyor, then they undergo pneumatic peeling to remove the skin. Next, they pass through an inspection table, where manual trimming is performed by personnel. This process is economically justified in countries where labor costs are not overly expensive. Additionally, minimal waste occurs during the trimming of onion tails.

 

This line includes a peeler designed for onions with thick skin, and its performance is lower, as the peeler operates at a speed of only 50 pieces/minute. Thus, this performance corresponds to the full capacity of the line for cleaned onions. If higher capacity is required, additional machines would be necessary, which would increase both the cost and complexity of the system.

 

Line composition and technical characteristics:

1. Hopper feeding conveyor. Dimensions: 1500(W) x 3200(L) x 1700(H). Power supply: 3P, 380 V and 1.3 kW.
2. Root and top cutter machine. Dimensions: 900(W) x 3000(L) x 1500(H). Power supply: 3P, 380 V and 1.5 kW.
3. Onion peeling machine. Dimensions: 700(W) x 2000(L) x 1700(H). Power supply: 3P, 380 V, 1.5 kW.
   2 layers trimming conveyor. Dimensions: 700(W) x 800(L) x 1050(H). Power supply: 3P, 380 V, 1.5 kW.
4. Skin discharging conveyor 1. Dimensions: 600(W) x 3000(L) x 400(H). Power supply: 3P, 380 V, 0,4 kW.
5. Skin discharging conveyor 2. Dimensions: 600(W) x 1800(L) x 350(H). Power supply: 3P, 380 V, 1,5 kW. 
6. Skin discharging conveyor 3. Dimensions: 600(W) x 2300(L) x 1700(H). Power supply: 3P, 380 V, 1,5 kW.

 

Transport: at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.

 

Packing: standard packing wooden pallet + carton box included in the product price. At the request of the buyer for a separate payment, packing in a wooden box is possible.

 

Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.

 

The check of electronic components is carried out by technical staff at our company office in Korea. The costs associated with technical inspection, functional testing, transportation and packaging of spare parts for their repair or replacement, as well as labor costs for the installation of spare parts, as mentioned above, are at the expense of the Buyer.

 

Repair or replacement of machine parts with non-original spare parts, voids any warranty obligations from the Manufacturer, this also applies in case of technical actions not presented in the “Operation and Maintenance Manual” machines or which are performed without the permission of the manufacturer. Parts of the machine that are subject to normal wear or improper maintenance during the operation of the machine are not covered by the warranty. In all of the above situations, the Buyer cannot claim damages from the Manufacturer.

 

The buyer is obliged to check that, upon delivery to the destination, the equipment technically fully complies with the contractual requirements and that no damage was found during transport. Otherwise, the client must not use the machine and notify us within 7 days. The responsibility of the Manufacturer is limited to the reimbursement or replacement of only those parts that, in the opinion of the Manufacturer, are damaged (faulty) or non-functional. In case of detection of damaged (faulty) parts of the machine, a complete replacement of the machine is excluded and the Manufacturer is not responsible for collateral damage or loss of customers of the Buyer due to a damaged (faulty) machine. Damaged (faulty) parts are replaced with new ones only after they are received at the factory.

 

The following situations are not covered by the warranty:

Accidental damage during transportation;
Damage caused by improper use of the machine or as a result of its negligence and insufficient maintenance;
Malfunctions caused by improper installation of the machine;
Interventions performed by unauthorized third parties or other malicious interference;
The company is not responsible for problems, damages, incidents that may arise as a result of the absence or poor application of the instructions described in the “Operation and Maintenance Manual for the machine”.

Any use or intervention on a machine that does not comply with the manual mentioned above should be considered wrong and inappropriate.

 

VAT: not included

 

Commissioning: not included. The cost of installation and commissioning of the machine, carried out by the technical staff, is $500,00 per day, plus transport and accommodation costs.

 

EU Compliance: all machines are accompanied by a printed "Operation and Maintenance Manual", which contains the EC Declaration of Conformity, as well as the corresponding nameplate.

 

Responsibility: The manufacturer does not bear any responsibility for the misuse of the machine.

 

Claims: Possible claims will only be taken into account if they are submitted in writing within 7 days from receipt of the Goods. The legal entity responsible for resolving possible claims is the Court of Korea.

 

Delivery of goods: delivery of goods without written approval and relevant accompanying documents is not allowed.

 

Manufacturer: Korea

 

Factory price FOB: from $66.700,00

  • Transport

    Transport at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.

  • VAT

    VAT not included

  • Warranty

    The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.

bottom of page