Vertical cutter mixer cooker for cream cheese, mayonnaise,condensed milk 400 L

This new Turkish equipment is ideal for the production of such products as processed cheese, sausage cheese, cream cheese, analog mozzarella, imitation mozzarella, products such as condensed milk, classic mayonnaise, mayonnaise-type sauce, olive oil mayonnaise,and many other little-known national food products,  etc.
 
The melting of the prepared mixture is carried out in a special closed mixer type Stephan. The cheese mass is heated with the help of steam, which is supplied under high pressure directly into the product (steam passes through a filter). At the same time, the mass is mixed with a special blade at a speed of 1000 rpm. 
 
The melting point is 85–90°C, the product is kept at it for 3–8 minutes. The end of melting is determined according to the state of the mass: it must be homogeneous and sufficiently fluid, without unmelted particles of cheese. Cream cheese mass pumped through pipes and immediately packaged on special machines in various consumer containers. The cheese is then chilled in a refrigerator chamber to a temperature not higher than plus 15°C.
The main functions of the mixers of this series:
Made entirely of AISI 304 stainless steel.
Direct injection of steam into the product through nozzles (number of nozzles depends on the model).
Each mixer comes with a mobile dehumidification station (separation), purification (filtration) and regulation of steam pressure.
Steam jacket for heating and cooling the product (automatic control).
Knives (Germany) with adjustable speed from 50 to 3,000 rpm (knives have a special mold for product rotation in the boiler).
Knife shaft seal with water cooling circuit.
Scrapers (for mixing and feeding the product to the knives).
Cooking temperature up to 95 degrees Celsius.
Injection of air into the boiler for complete emptying when draining the product.
Saving recipes by default 10 (optionally more).
Flow meter for automatic water intake according to the recipe.
Vacuum (for cooking under vacuum, for sucking additional raw materials through the holes on the lid from funnels, to suck out bubbles in the finished product, to control pressure and boiler temperature).
 
Optional features for additional payment:
Manufacture of parts in contact with products made of AISI 316 stainless steel.
Cooking up to 125 degrees in the version with automatic opening and closing of the lid.
Adjustment in % of negative vacuum pressure ratio.
Large floor funnel(s) for feeding dry and liquid ingredients into the cooking process without stopping the cooking process and opening the boiler lid.
Funnels are supplied with a vibrator.
Automatic loader.
Viewing window with wiper and light.
Flow meter for automatic intake of melted fat (butter) according to a recipe without having to stop the brewing process and open the kettle lid.
Valve for regulating the flow rate of oil / fat supply to the boiler.
Buffer tank for preliminary accumulation of finished products for further
continuous supply of products to the dispenser. (The buffer tank has a steam jacket, CIP heads, mixer with scrapers, sensor, and control knobs temperature).
Vane pump for transferring finished products from cutter to and from buffer tank buffer tank into the dispenser.
Twin screw pumps for transferring finished products from the cutter to and from the buffer tank buffer tank into the dispenser. (Double screw pump is required for thick products or if it is necessary to pump products over long distances or to the upper floors of a building).
Micro cutter (knife homogenizer) for micron grinding/homogenization of the product.
 
Transport: at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.
 
Packing: standard packing wooden pallet + carton box included in the product price. At the request of the buyer for a separate payment, packing in a wooden box is possible.
 
Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.
 
The check of electronic components is carried out by technical staff at our company office in Turkey. The costs associated with technical inspection, functional testing, transportation, and packaging of spare parts for their repair or replacement, as well as labor costs for the installation of spare parts, as mentioned above, are at the expense of the Buyer.
 
Repair or replacement of machine parts with non-original spare parts, voids any warranty obligations from the Manufacturer, this also applies in case of technical actions not presented in the “Operation and Maintenance Manual” machines or which are performed without the permission of the manufacturer. Parts of the machine that are subject to normal wear or improper maintenance during the operation of the machine are not covered by the warranty. In all of the above situations, the Buyer cannot claim damages from the Manufacturer.
 
The buyer is obliged to check that, upon delivery to the destination, the equipment technically fully complies with the contractual requirements and that no damage was found during transport. Otherwise, the client must not use the machine and notify us within 7 days. The responsibility of the Manufacturer is limited to the reimbursement or replacement of only those parts that, in the opinion of the Manufacturer, are damaged (faulty) or non-functional. In case of detection of damaged (faulty) parts of the machine, a complete replacement of the machine is excluded and the Manufacturer is not responsible for collateral damage or loss of customers of the Buyer due to a damaged (faulty) machine. Damaged (faulty) parts are replaced with new ones only after they are received at the factory.
 
The following situations are not covered by the warranty:
Accidental damage during transportation;
Damage caused by improper use of the machine or as a result of its negligence and insufficient maintenance;
Malfunctions caused by improper installation of the machine;
Interventions performed by unauthorized third parties or other malicious interference;
The company is not responsible for problems, damages, or incidents that may arise as a result of the absence or poor application of the instructions described in the “Operation and Maintenance Manual for the machine”. Any use or intervention on a machine that does not comply with the manual mentioned above should be considered wrong and inappropriate.
 
VAT: not included
 
Commissioning: not included. The cost of installation and commissioning of the machine, carried out by the technical staff, is $500,00 per day, plus transport and accommodation costs.
 
EU Compliance: all machines are accompanied by a printed "Operation and Maintenance Manual", which contains the EC Declaration of Conformity, as well as the corresponding nameplate.
 
Responsibility: The manufacturer does not bear any responsibility for the misuse of the machine.
 
Claims: Possible claims will only be taken into account if they are submitted in writing within 7 days from receipt of the Goods. The legal entity responsible for resolving possible claims is the Court of Turkey.
 
Delivery of goods: delivery of goods without written approval and relevant accompanying documents is not allowed.
 
Manufacturer: Turkey
 
Factory price EXW: from 225.000,00 EUR