top of page
Automatic packaging machine for melted cheese 3000 units/h

Automatic packaging machine for melted cheese 3000 units/h


Introducing a new automatic machine designed for filling and packaging liquid and paste-like products into polystyrene and polypropylene containers. This machine is widely used in packaging lines for dairy products, creams, and cream cheeses with a snap-on lid over a thermoware in volumes ranging from 0.10 to 0.20 liters. The machine features rectangular cups (which can also have a different shape), dispensers, aluminum lid holders, therm-oware, and snap-on lids for containers up to 0.2 liters.


Equipment specifications:

Production capacity: 3000 units/hour
Dosing range: 0.10 – 0.20 liters
Installed power: 2.50 kW
Rated voltage: 3 x 380 V 50 Hz
Rated pressure: 6 - 8 bar
Air consumption (at 6 bar): 600 Nl/min
Dimensions (L x W x H): 2800 x 1200 x 2300 mm
Machine weight: 1150 kg
Cup sealing ring diameter: 75 mm


Automatic filling of liquid, paste-like, and creamy products into cups
Cup retrieval from a cartridge
Product dosing with weighing
Lid retrieval from a cartridge
Lid sealing
Placement of fully sealed cups on the receiving table
Option for ink-jet printer traverses
Option for three-level sensors
PLC and touch-screen control
Frequency regulator
Machine operation statistics
CIP cleaning
Basic Configuration: 59,200.00 EUR
Option with snap-on lids through Thermoware: 7,280.00 EUR
Total: 66,480.00 EUR


Additional Options:

Option for additional closure tool with a diameter of 95 mm: 7,280.00 EUR
Clean option with HEPA filters: 12,940.00 EUR
UV lamps option for cups and lids: 2,990.00 EUR
Ultra Clean option with HEPA filters: 15,910.00 EUR
Option for fruit pieces: 11,100.00 EUR
Option for fruit pieces with yogurt or sour cream: 9,380.00 EUR
Ink-jet option (Videojet 12 - 10): 5,560.00 EUR


Transport: at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.


Packing: standard packing wooden pallet + carton box included in the product price. At the request of the buyer for a separate payment, packing in a wooden box is possible.


Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.


The check of electronic components is carried out by technical staff at our company office in Serbia. The costs associated with technical inspection, functional testing, transportation and packaging of spare parts for their repair or replacement, as well as labor costs for the installation of spare parts, as mentioned above, are at the expense of the Buyer.


Repair or replacement of machine parts with non-original spare parts, voids any warranty obligations from the Manufacturer, this also applies in case of technical actions not presented in the “Operation and Maintenance Manual” machines or which are performed without the permission of the manufacturer. Parts of the machine that are subject to normal wear or improper maintenance during the operation of the machine are not covered by the warranty. In all of the above situations, the Buyer cannot claim damages from the Manufacturer.


The buyer is obliged to check that, upon delivery to the destination, the equipment technically fully complies with the contractual requirements and that no damage was found during transport. Otherwise, the client must not use the machine and notify us within 7 days. The responsibility of the Manufacturer is limited to the reimbursement or replacement of only those parts that, in the opinion of the Manufacturer, are damaged (faulty) or non-functional. In case of detection of damaged (faulty) parts of the machine, a complete replacement of the machine is excluded and the Manufacturer is not responsible for collateral damage or loss of customers of the Buyer due to a damaged (faulty) machine. Damaged (faulty) parts are replaced with new ones only after they are received at the factory.


The following situations are not covered by the warranty:

Accidental damage during transportation;
Damage caused by improper use of the machine or as a result of its negligence and insufficient maintenance;
Malfunctions caused by improper installation of the machine;
Interventions performed by unauthorized third parties or other malicious interference;
The company is not responsible for problems, damages, incidents that may arise as a result of the absence or poor application of the instructions described in the “Operation and Maintenance Manual for the machine”. Any use or intervention on a machine that does not comply with the manual mentioned above should be considered wrong and inappropriate.


VAT: not included


Commissioning: Installation is an additional 1,900.00 EUR. The cost of installation and commissioning of the machine, carried out by the technical staff, is $500,00 per day, plus transport and accommodation costs.


EU Compliance: all machines are accompanied by a printed "Operation and Maintenance Manual", which contains the EC Declaration of Conformity, as well as the corresponding nameplate.


Responsibility: The manufacturer does not bear any responsibility for the misuse of the machine.


Claims: Possible claims will only be taken into account if they are submitted in writing within 7 days from receipt of the Goods. The legal entity responsible for resolving possible claims is the Court of Serbia.


Delivery of goods: delivery of goods without written approval and relevant accompanying documents is not allowed.


Manufacturer: Serbia


Factory price EXW: from 66,480.00 EUR

    bottom of page