Crispbread maker
Crispbread maker
Our Italian company produces an automatic crispbread machine with sprinkling of poppy seeds, sesame seeds, salt, herbs, or spices. In this model you just need to load already rolled out dough, then the machine will cut and spread the crispbread on baking sheets. In a more expensive model, the machine already has a dough pre-rolling and lamination unit.
This is machine for the rye bread/crispbread production such as FINNCRISP or RYVITA.
Before starting the equipment, various parameters of the finished product are adjusted, and then the operator puts the laminated dough into the loading conveyor and the dough is cut. The secret of success in this business lies in the original recipe. Packaging can be very different, including paper, blister, box or flow pack. The machine is supplied as well as the entire line (from dough mixer to palletizer). All surfaces in contact with the dough are made of INOX stainless steel or Teflon.
The output of finished products can reach the speed of 50kg/hour. The tension of the dough is regulated by a speed variator. The lever allows you to change the product length even if the machine is running. The machine is suitable for working with both soft and hard dough, and loading crispbreads on baking sheets. The thickness of the dough is displayed numerically on the display, for easy reading.
Calculation for production:
- n° 4 rows per 4 lenghts of 12 cm/each.
- 16 pieces per pan (4x4)
- weight 10 gr.=0,16 kg./pan
- 5000 : 0,16 = 312 pans/hour
- 312 : 60 = 5,2 pans/minute Considerations: little weight of product on the pan.
Production 50 kg/h aprox (Your product = 50 kg./h) a it works with pans 60 x 40 cm.
b 3 groups of sheeting rollers incorporated
c equipped with forming rollers 37 mm. width approx., x 4 grooves, thickness 2,5 mm.
d guillotine knife for breadsticks with big diameter e speed of production 6 pans per minute.
Machine technical information:
forming rollers 4 mm thick
dough thickness maximum 4-12 mm
dough width 15 cm
loaves length 5-6-7-10-13-18-26 cm
pan dimensions 60 x 40 cm
tray output speed 5 pcs/min
production capacity up to 50 kg/h
electric power of equipment 0.5 kW
length 190 mm
width 70 mm
height 140 mm
weight 130 kg
At your request, the machine already has the following advantages:
a) feeding conveyor for rolled dough
b) separator machine for breadsticks
c) equipped with roller grooves with a diameter of 5 x 180 mm (or another diameter of your choice)
d) a device to increase the length of the sticks
e) automatic cutting of breadsticks of different lengths
f) an inverter for regulating the stretching of loaves
g) automatic loading of loaves on baking sheets
h) a container for storing baking sheets for 8/10 pieces
i) The machine works with 60 x 40 cm baking sheets.
j) average production speed 4 trays per minute
Options: in addition to the mold installed on the machine (specified at the time of ordering), other dies can be made for different types and diameters of breadsticks 4-12 mm. A standard order includes one form.
Note: the price does not include packaging in foil on a pallet in a wooden box of 250.00 EUR
Transport: at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.
Packing: standard packing wooden pallet + carton box included in the product price. At the request of the buyer for a separate payment, packing in a wooden box is possible.
Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.
The check of electronic components is carried out by technical staff at our company office in Italy. The costs associated with technical inspection, functional testing, transportation and packaging of spare parts for their repair or replacement, as well as labor costs for the installation of spare parts, as mentioned above, are at the expense of the Buyer.
Repair or replacement of machine parts with non-original spare parts, voids any warranty obligations from the Manufacturer, this also applies in case of technical actions not presented in the “Operation and Maintenance Manual” machines or which are performed without the permission of the manufacturer. Parts of the machine that are subject to normal wear or improper maintenance during the operation of the machine are not covered by the warranty. In all of the above situations, the Buyer cannot claim damages from the Manufacturer.
The buyer is obliged to check that, upon delivery to the destination, the equipment technically fully complies with the contractual requirements and that no damage was found during transport. Otherwise, the client must not use the machine and notify us within 7 days. The responsibility of the Manufacturer is limited to the reimbursement or replacement of only those parts that, in the opinion of the Manufacturer, are damaged (faulty) or non-functional. In case of detection of damaged (faulty) parts of the machine, a complete replacement of the machine is excluded and the Manufacturer is not responsible for collateral damage or loss of customers of the Buyer due to a damaged (faulty) machine. Damaged (faulty) parts are replaced with new ones only after they are received at the factory.
The following situations are not covered by the warranty:
Accidental damage during transportation;
Damage caused by improper use of the machine or as a result of its negligence and insufficient maintenance;
Malfunctions caused by improper installation of the machine;
Interventions performed by unauthorized third parties or other malicious interference;
The company is not responsible for problems, damages, incidents that may arise as a result of the absence or poor application of the instructions described in the “Operation and Maintenance Manual for the machine”. Any use or intervention on a machine that does not comply with the manual mentioned above should be considered wrong and inappropriate.
VAT: not included.
Commissioning: not included. The cost of installation and commissioning of the machine, carried out by the technical staff, is 500,00 EUR per day, plus transport and accommodation costs.
EU Compliance: all machines are accompanied by a printed "Operation and Maintenance Manual", which contains the EC Declaration of Conformity, as well as the corresponding nameplate.
Responsibility: The manufacturer does not bear any responsibility for the misuse of the machine.
Claims: Possible claims will only be taken into account if they are submitted in writing within 7 days from receipt of the Goods. The legal entity responsible for resolving possible claims is the Court of Italy.
Delivery of goods: delivery of goods without written approval and relevant accompanying documents is not allowed.
Manufacturer: Italy
Price EXW: from 65.136,00 EUR