Enrobing machine 120 mm
With our German chocolate coating machine, it is possible to enrobing various confectionery products with chocolate or other glaze, completely or so much on one side. The 120 mm enrober has a capacity of 15 kg and will be supplied as a simple table top model. The standard model is equipped with a removable 1m outfeed conveyor to cool finished goods on paper. This is the minimum budget option for beginners.
Confectionery of all kinds and cakes up to about 5 cm high, as well as cream cheese, for example, can be coated with chocolate, fondant, powdered sugar or simply icing. The machine usually runs at a belt speed of 0.5 to 2 meters per minute, the belt speed is adjustable.
Weight: 47 kg
Voltage 1 phase, 230 V, 50-60 Hz
Power consumption 1200 W
Conveyor width 120 mm
Outfeed conveyor unloading length: 1 m
Conveyor speed average 80 m/h
Travel speed 0.5 m-2.5 m/min
Adjustment of the thickness of the applied glaze: adjustable by stepping of the blower
Melting temperature control: digital by glaze thermostat
Dimensions length: 800 mm, 1,800 mm with outfeed conveyor: width 500 mm, height 550 mm
Chocolate throughput: 15 kg/h
Weight, dimensions of equipment for transportation. 130 kg, 120 x 80 x 118 cm (box size).
With paper roll, the perfect addition to every cooling machine.
In different countries, our equipment may have different names: enrobing machine 120 mm, chocolate coating machine, enrobing machine, chocolate coating machinery, mini enrobing machine, chocolate coating equipment.
Transport: at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.
Packing: standard packaging is in a cardboard box, this is not included in the price of the product.
Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.
The check of electronic components is carried out by technical staff at our company office in Germany. The costs associated with technical inspection, functional testing, transportation and packaging of spare parts for their repair or replacement, as well as labor costs for the installation of spare parts, as mentioned above, are at the expense of the Buyer.
Repair or replacement of machine parts with non-original spare parts, voids any warranty obligations from the Manufacturer, this also applies in case of technical actions not presented in the “Operation and Maintenance Manual” machines or which are performed without the permission of the manufacturer. Parts of the machine that are subject to normal wear or improper maintenance during the operation of the machine are not covered by the warranty. In all of the above situations, the Buyer cannot claim damages from the Manufacturer.
The buyer is obliged to check that, upon delivery to the destination, the equipment technically fully complies with the contractual requirements and that no damage was found during transport. Otherwise, the client must not use the machine and notify us within 7 days. The responsibility of the Manufacturer is limited to the reimbursement or replacement of only those parts that, in the opinion of the Manufacturer, are damaged (faulty) or non-functional. In case of detection of damaged (faulty) parts of the machine, a complete replacement of the machine is excluded and the Manufacturer is not responsible for collateral damage or loss of customers of the Buyer due to a damaged (faulty) machine. Damaged (faulty) parts are replaced with new ones only after they are received at the factory.
The following situations are not covered by the warranty:
Accidental damage during transportation;
Damage caused by improper use of the machine or as a result of its negligence and insufficient maintenance;
Malfunctions caused by improper installation of the machine;
Interventions performed by unauthorized third parties or other malicious interference;
The company is not responsible for problems, damages, or incidents that may arise as a result of the absence or poor application of the instructions described in the “Operation and Maintenance Manual for the machine”. Any use or intervention on a machine that does not comply with the manual mentioned above should be considered wrong and inappropriate.
VAT: not included.
Commissioning: not included. The cost of installation and commissioning of the machine, carried out by the technical staff, is 500 EUR per day, plus transport and accommodation costs.
EU Compliance: all machines are accompanied by a printed "Operation and Maintenance Manual", which contains the EC Declaration of Conformity, as well as the corresponding nameplate.
Responsibility: The manufacturer does not bear any responsibility for the misuse of the machine.
Claims: Possible claims will only be taken into account if they are submitted in writing within 7 days from receipt of the Goods. The legal entity responsible for resolving possible claims is Germany.
Delivery of goods: delivery of goods without written approval and relevant accompanying documents is not allowed.
Factory price EXW: 11.350,00 EUR
top of page