top of page
Popcorn making equipment 40 kgh

Popcorn making equipment 40 kgh


We offer you a new Chinese equipment, popcorn explosion drum with stirring function up to 40 kg/h + unloading table. Unloading is carried out by turning the drum, everything is simple. For the manufacture of popcorn, only a special variety of corn is used, namely, exploding. Conventional corn, used mainly for starch or livestock feed, is very difficult or impossible to make popcorn. Exploding corn has a very thin, but much harder and slightly vitreous shell than ordinary corn. After cooking popcorn, parts of this shell often remain stuck to the final product.


Exploding corn has a very large yield. A handful of grains gives a large bowl of popcorn. We make a cost effective popcorn machine with a large exhaust system and an automatic oil pump.


Technical specifications:

power: 15kw/380V/50Hz/3ph
size LxWxH: 2040x930x1330 mm;
weight 180 kg
CE certification
main material 304 stainless steel
warranty period 1 year
heating temperature 220C

If you want a hood kit, it will cost FOB: $7.000,00
If you want the kit without automatic oil pump, it will cost FOB: $5.500,00

Multifunctional and large capacity.
Easily chill popcorn on the table and in a larger workspace.
Use a round bottom kettle to avoid centrifugal effect and ensure that all raw materials are in the middle (in the area of effective heating) and a good explosion when the agitator rotates in the kettle.
Washable filter to filter out residues.
It is easy to clean the boiler in the machine.
Popcorn making in 3 minutes, high capacity, 40% energy saving and 95% pelletizing.
Quality spare parts from world famous ABB and Siemens brand, ensure stability, longer service life and easy replacement.


Transport: at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.


Packing: standard packing wooden pallet + carton box included in the product price. At the request of the buyer for a separate payment, packing in a wooden box is possible.


Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.


The check of electronic components is carried out by technical staff at our company office in China. The costs associated with technical inspection, functional testing, transportation and packaging of spare parts for their repair or replacement, as well as labor costs for the installation of spare parts, as mentioned above, are at the expense of the Buyer.


Repair or replacement of machine parts with non-original spare parts, voids any warranty obligations from the Manufacturer, this also applies in case of technical actions not presented in the “Operation and Maintenance Manual” machines or which are performed without the permission of the manufacturer. Parts of the machine that are subject to normal wear or improper maintenance during the operation of the machine are not covered by the warranty. In all of the above situations, the Buyer cannot claim damages from the Manufacturer.


The buyer is obliged to check that, upon delivery to the destination, the equipment technically fully complies with the contractual requirements and that no damage was found during transport. Otherwise, the client must not use the machine and notify us within 7 days. The responsibility of the Manufacturer is limited to the reimbursement or replacement of only those parts that, in the opinion of the Manufacturer, are damaged (faulty) or non-functional. In case of detection of damaged (faulty) parts of the machine, a complete replacement of the machine is excluded and the Manufacturer is not responsible for collateral damage or loss of customers of the Buyer due to a damaged (faulty) machine. Damaged (faulty) parts are replaced with new ones only after they are received at the factory.


The following situations are not covered by the warranty:

Accidental damage during transportation;
Damage caused by improper use of the machine or as a result of its negligence and insufficient maintenance;
Malfunctions caused by improper installation of the machine;
Interventions performed by unauthorized third parties or other malicious interference;
The company is not responsible for problems, damages, incidents that may arise as a result of the absence or poor application of the instructions described in the “Operation and Maintenance Manual for the machine”. Any use or intervention on a machine that does not comply with the manual mentioned above should be considered wrong and inappropriate.


VAT: not included


Commissioning: not included. The cost of installation and commissioning of the machine, carried out by the technical staff, is $500,00 per day, plus transport and accommodation costs.


EU Compliance: all machines are accompanied by a printed "Operation and Maintenance Manual", which contains the EC Declaration of Conformity, as well as the corresponding nameplate.


Responsibility: The manufacturer does not bear any responsibility for the misuse of the machine.


Claims: Possible claims will only be taken into account if they are submitted in writing within 7 days from receipt of the Goods. The legal entity responsible for resolving possible claims is the Court of China.


Delivery of goods: delivery of goods without written approval and relevant accompanying documents is not allowed.


Manufacturer: China


Factory price FOB: from $6.200,00

  • Transport

    Transport: at the expense of the buyer. We offer delivery to any non-sanctioned country worldwide, subject to prior agreement.

  • VAT

    VAT: not included

  • Warranty

    Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic parts.

bottom of page