top of page
Spiral puff cooler

Spiral puff cooler


We offer a new Dutch atmospheric air cooler, open type for puffs on trays 800 x 600 mm, with a total capacity of 1000 kg/h.


Technical specifications:

Model: OPTIFREEZE Econo 10-813 / 2765-175
Housing (L x W x H): 5.000 x 5.500 x 2.900 mm
System housing: B2 stainless steel interior.
Outside white laminated galvanized sheet. Complete with 2 access doors and a sunroof for maintenance and cleaning.

Total belt width: 813 mm 
Usable belt width: 737 mm 
Usable belt length: 138 m
Usable belt area: 86 m2.
Belt type: stainless steel balanced woven.
Designation: B 0 - 12 - 17
Side rails: built-in from the outside.
Number of tiers: 10
Free product height: 60 mm ± 2mm
Direct drive belt type: Stainless steel balanced woven.
Direct main drive: 1 x 2.2 kW
Auxiliary drive: 1 x 0.37 kW

Minimum retention time: 15 minutes (belt speed 9.19 m1/min.).
Nominal hold time: 30 minutes (tape speed 4.60 m1/min.).
Maximum holding time: 60 minutes (tape speed 2.30 m1/min.)
Feeding height: 800 mm
Dumping height: 2,650 m

Reference product: Croissants on metal trays
Dimensions: 800 x 600 x 50 mm.
Weight: 1.000 grams
* Possible retention time: 35 minutes.
Serving temperature: + 100° C

Outlet temperature: + 35° C (balanced)
** Overall performance:
1.000 kg/hour
Belt loading: 55% belt loading

Control panel: stainless steel with ventilation inside, preventing temperature rise during operation.
Panel position: on the side of the surrounding scroll cooler.
Installed power: 2.0 kW (4.0 kVA) to be confirmed.
Power supply: 260/400 V, 3 pH, 50 Hz

Belt washer: 2 belt cleaning sprays on both sides.
Drum cleaning: Full height spray on each row.
Internal door cleaning: built into the drum, spraying outwards at each level.
Chemical dosing system: Nilfisk unit capable of inserting 2 detergents and a pressure water pump controlled by the main PLC.


OPTIFREEZE CIP cleaning system: 3.000,00 EUR
Chemical dosing system Nilfisk: 9.500,00 EUR

In different countries, our equipment may have different names: spiral puff cooler, spiral puff cooler 1000 kg/h, spiral cooler, indoor puff cooler, Closed cooler for puff, and closed cooler for puff bakery.


Transport: Buyer is responsible for shipping to any non-sanctioned country worldwide.


Packaging: Standard cardboard box packaging is already included in the price of your order.


Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic components.


Electronic component checks are performed by technical staff at our company's office in the Netherlands. Expenses related to technical inspections, functionality checks, transportation, and packaging of spare parts for repair or replacement, as well as labor costs for installing spare parts, are the responsibility of the buyer.


Repair or replacement of machine parts with non-original spare parts voids any manufacturer warranties. This also applies to technical actions not provided for in the machine's "Operation and Maintenance Manual" or those performed without the manufacturer's permission. Machine parts subject to natural wear and tear or improper maintenance during machine operation are not covered by warranty. In all of the aforementioned situations, the buyer cannot demand compensation from the manufacturer.


The buyer must ensure that upon delivery to the destination, the equipment fully complies with contractual requirements and that no damage occurred during transport. Otherwise, the client should not use the machine and must notify us within 7 days. The manufacturer's liability is limited to reimbursement or replacement of only those parts that, in the manufacturer's opinion, are defective or non-functional. Suppose damaged or defective machine parts are discovered. In that case, the complete replacement of the machine is excluded, and the manufacturer is not responsible for any collateral damage or customer loss due to a faulty machine. Defective parts are replaced with new ones only after receipt at the manufacturer's facility.


The following situations are not covered by the warranty:

Accidental damage during transportation.
Damage caused by improper machine use or negligence and inadequate technical maintenance.
Malfunctions resulting from incorrect machine installation.
Interventions performed by unauthorized third parties or other malicious interference.

The company is not responsible for problems, damage, or incidents arising from the absence or improper application of instructions described in the "Operation and Maintenance Manual" for the machine. Any machine use or intervention that does not conform to the aforementioned manual should be considered incorrect and inappropriate.


VAT: Not included.


Installation and Setup: Not included. The cost of machine installation and setup performed by technical personnel is 450.00 EUR per day, plus transportation and accommodation expenses.


EU Compliance: All machines come with a printed "Operation and Maintenance Manual" containing a certificate of compliance with EU standards and the corresponding label.


Liability: The manufacturer is not liable for improper machine use.


Claims: Any potential claims will be considered only if submitted in writing within 7 days of receiving the product. The legal entity responsible for resolving potential claims is the court in the Netherlands.


Product Delivery: Product delivery is not permitted without prior written agreement and the corresponding accompanying documents.


Manufacturer: Netherlands


Factory price EXW: from 97.500,00 EUR

  • Transport

    Transport: Buyer is responsible for shipping to any non-sanctioned country worldwide.

  • Packaging

    Packaging: Standard cardboard box packaging is already included in the price of your order.

  • VAT

    VAT: Not included.

bottom of page