Used Oystar Hassia yogurt packaging equipment
We offer a used European automatic machine for forming, packing, capping (FFS) etc packaging for stirred yogurt with fruit particles with a maximum size of 10 mm. Productivity: 4 x 2 = 8 cups per stroke, 20 strokes per minute. Current size packaging: no more than 125 g, upper dimensions: 63 x 63 mm, lower side round with 64 mm deep.
Packaging material: lower foil: PS, foil width 276 mm, thickness 1000 microns. Top foil: PS, foil width 258 mm, thickness 100 microns. Banderol: width 496 mm. Stations: foil feeding from below. Preheating station. Station foil thermoforming. Banderol station. Filler for dosing viscose of products (piston dispenser, 4 hoppers, cleaned by CIP, with hydraulic drive). Cover material feeding system with ultraviolet radiation deactivation module Hereaus. Alignment of the cover material (in the center of the print) with the photocell.
Sealing station. Perforation station in a cluster 2 x 2 = 4. Unloading in a tray packer A control panel with Siemens and SIMODRIVE control elements is available. Clean the air filter above the machine. Electric scheme and manual are available for use. Including tray mounting device and tray packer, manufacturer PCA Packmaschinen, type TA-3000, serial number TA-135, production hours: 2000, power: 2.5 kW - 400 V. Hot-melt adhesive Nordson 3400-3EA. The control panel of Siemens S5 PLC.
Manufacturer: Oyster Hassia
Type: THM 18/42
Productivity: 9,600 cups per hour
Year of production: 1993
Power: 42 kW - 380 V - 50 Hz.
Installation dimensions (L x W x H): 6.60 x 2.80 x ± 3.50 m.
Condition: Good
Location: Netherlands
Transport: Buyer is responsible for shipping to any non-sanctioned country worldwide.
Packaging: Standard cardboard box packaging is already included in the price of your order.
Warranty: The warranty period for new equipment is 12 months for mechanical parts and 6 months for electronic components.
Electronic component checks are performed by technical staff at our company's office in Netherlands. Expenses related to technical inspections, functionality checks, transportation, and packaging of spare parts for repair or replacement, as well as labor costs for installing spare parts, are the responsibility of the buyer.
Repair or replacement of machine parts with non-original spare parts voids any manufacturer warranties. This also applies to technical actions not provided for in the machine's "Operation and Maintenance Manual" or those performed without the manufacturer's permission. Machine parts subject to natural wear and tear or improper maintenance during machine operation are not covered by warranty. In all of the aforementioned situations, the buyer cannot demand compensation from the manufacturer.
The buyer must ensure that upon delivery to the destination, the equipment fully complies with contractual requirements and that no damage occurred during transport. Otherwise, the client should not use the machine and must notify us within 7 days. The manufacturer's liability is limited to reimbursement or replacement of only those parts that, in the manufacturer's opinion, are defective or non-functional. If damaged or defective machine parts are discovered, the complete replacement of the machine is excluded, and the manufacturer is not responsible for any collateral damage or customer loss due to a faulty machine. Defective parts are replaced with new ones only after receipt at the manufacturer's facility.
The following situations are not covered by the warranty:
Accidental damage during transportation.
Damage caused by improper machine use or negligence and inadequate technical maintenance.
Malfunctions resulting from incorrect machine installation.
Interventions performed by unauthorized third parties or other malicious interference.
The company is not responsible for problems, damage, or incidents arising from the absence or improper application of instructions described in the "Operation and Maintenance Manual" for the machine. Any machine use or intervention that does not conform to the aforementioned manual should be considered incorrect and inappropriate.
VAT: Not included.
Installation and Setup: Test start-up and final run-in of the machine at the seller's site using the product before shipment. Not included. The cost of machine installation and setup performed by technical personnel is 500.00 EUR per day, plus transportation and accommodation expenses.
EU Compliance: All machines come with a printed "Operation and Maintenance Manual" containing a certificate of compliance with EU standards and the corresponding label.
Liability: The manufacturer is not liable for improper machine use.
Claims: Any potential claims will be considered only if submitted in writing within 7 days of receiving the product. The legal entity responsible for resolving potential claims is the court in Netherlands.
Product Delivery: Product delivery is not permitted without prior written agreement and the corresponding accompanying documents.
Manufacturer: EC European Union
Factory price FCA: 75.000,00 EUR